Return to site

Shower Slot Drain

broken image


SLOT DRAINS Slot Drains provide a high volume water flow, with a narrow surface opening. This is perfect for not only a sleek look and finish, but also with the ability to move the same amount of water and no larger space or opening on your surface area. Comes in three options, our Micro Slot system, Slot Drain system, and Wall Slot system. Unidrain's floor drains are an intelligent and functional solution for the shower cubicle or wet room. Whether you opt for the familiar linear drain or the space-saving corner drain, you will get a stylish and 100% watertight drain that fits perfectly into any construction.

  1. Shower Slot Drain
  2. Shallow Shower Slot Drain
  3. Shower Tray Slot Drain

Key facts

  • Waterproof, coated, ready-to-tile hard foam shower system with integrated gradient of approx. 1.0%, pre-installed drainage channel
  • Drainage via single-sided shadow gap
  • Standard element 1200 x 1200 x 70 mm
  • Flow rate horizontal/vertical 42 l/min, standard DN 50 connection
  • Dry-out protection with second water trap chamber for horizontal drain
  • Horizontal drain with general construction testing certificate
  • Depending on the geometry and installation height, the shower system can be trimmed on-site by the installer to 700 x 500 mm
  • Easy cleaning with special brush (supplied)

Barrier-free

  • Minimum tile dimensions: 50 x 50 mm
  • Shadow gap is easy to clean with supplied brush
Shower

At a glance

Section drawing

Shower

Dimensions

Slot shower drain stainless

Sealing

Shower
  • For moderate to high moisture exposure (class A0 and A, in accordance with ZDB spec sheet)
  • General construction testing certificate according to List A Part 2, Section 1.10 (sealing in conjunction with tile and slab floor coverings)
  • ETA-13/0386
  • ÖNORM B 2207: When professionally installed, complies with load classes specified in the standard up to maximum group W4

Soundproofing

  • DIN 4109 / ÖNORM B 8115 / SIA 181: Technical reports from the Fraunhofer Institute for Building Physics verify the achievable noise levels (water impact noise, EMPA hammer, impact noise reduction) for installations with Poresta® soundproofing accessories. See the soundproofing brochure for details: www.poresta.com

Fireproofing

The following accessories are available separately:

Slot

SLOT DRAINS Slot Drains provide a high volume water flow, with a narrow surface opening. This is perfect for not only a sleek look and finish, but also with the ability to move the same amount of water and no larger space or opening on your surface area. Comes in three options, our Micro Slot system, Slot Drain system, and Wall Slot system. Unidrain's floor drains are an intelligent and functional solution for the shower cubicle or wet room. Whether you opt for the familiar linear drain or the space-saving corner drain, you will get a stylish and 100% watertight drain that fits perfectly into any construction.

  1. Shower Slot Drain
  2. Shallow Shower Slot Drain
  3. Shower Tray Slot Drain

Key facts

  • Waterproof, coated, ready-to-tile hard foam shower system with integrated gradient of approx. 1.0%, pre-installed drainage channel
  • Drainage via single-sided shadow gap
  • Standard element 1200 x 1200 x 70 mm
  • Flow rate horizontal/vertical 42 l/min, standard DN 50 connection
  • Dry-out protection with second water trap chamber for horizontal drain
  • Horizontal drain with general construction testing certificate
  • Depending on the geometry and installation height, the shower system can be trimmed on-site by the installer to 700 x 500 mm
  • Easy cleaning with special brush (supplied)

Barrier-free

  • Minimum tile dimensions: 50 x 50 mm
  • Shadow gap is easy to clean with supplied brush

At a glance

Section drawing

Dimensions

Sealing

  • For moderate to high moisture exposure (class A0 and A, in accordance with ZDB spec sheet)
  • General construction testing certificate according to List A Part 2, Section 1.10 (sealing in conjunction with tile and slab floor coverings)
  • ETA-13/0386
  • ÖNORM B 2207: When professionally installed, complies with load classes specified in the standard up to maximum group W4

Soundproofing

  • DIN 4109 / ÖNORM B 8115 / SIA 181: Technical reports from the Fraunhofer Institute for Building Physics verify the achievable noise levels (water impact noise, EMPA hammer, impact noise reduction) for installations with Poresta® soundproofing accessories. See the soundproofing brochure for details: www.poresta.com

Fireproofing

The following accessories are available separately:

Documents

Sealing

Poresta® KMK T joint sealing strip, transversally elastic, fleece-lined, 100 mm wide, for sealing joints beneath ceramic tiles in damp and wet room environments

Poresta® KMK TI sealingstrip, inner corner, transversally elastic, fleece-lined No deposit poker bonus instant uk 2020.

Shower Slot Drain

Poresta® KMK TA sealing strip, outer corner, transversally elastic, fleece-lined

Mounting

Shallow Shower Slot Drain

Poresta® UBE foundation elements for height adjustment of expanded polystyrene as an alternative to screed base

Design

Shower Tray Slot Drain

Poresta Slot / Slot S add-on element 1200x600x65 mm





broken image